Differences

This shows you the differences between two versions of the page.

--- glacios_alignment [2022/11/18 13:41] – duranda
+++ glacios_alignment [2023/11/01 20:18] (current) – external edit 127.0.0.1
@@ Line 11: / Line 11: @@
 ==== Gain reference of the K2 camera ====
 This is done in Digital Micrograph (DM) on the K2 server.
-  * Go to an empty region on the sample
+  - Go to an empty region on the sample
-  * Go to high mag (e.g. 45000x)
+  - Go to high mag (e.g. 45000x)
-  * Insert 150µm C2 aperture
+  - Insert 150µm C2 aperture
-  * Go to spot size 2
+  - Go to spot size 2
-  * Check on the FluScreen that beam is centered
+  - Check on the FluScreen that beam is centered
-  * Digital Micrograph > Camera > Prepare Gain Reference
+  - Digital Micrograph > Camera > Prepare Gain Reference
-  * Perform the gain in Linear mode first
+  - Perform the gain in Linear mode first
-  * Adjust Beam Intensity to match the number of count on the camera
+  - Adjust Beam Intensity to match the number of count on the camera
-  * Proceed to Counting mode
+  - Proceed to Counting mode
-  * Press 'Yes' to aquire the dark frame reference image (take twice 3 min 30)
+  - Press 'Yes' to aquire the dark frame reference image (take twice 3 min 30)
-  * At the end of the dark ref update, you will be prompt to lower the dose: insert 30µm C2 aperture, go to spot size 6, adjust C2 lens to 39.6%)
+  - At the end of the dark ref update, you will be prompt to lower the dose: insert 30µm C2 aperture, go to spot size 6, adjust C2 lens to 39.6%)
-  * Lift the Fluscreen and aquire Counting Gain Reference Image (you DON'T need to match the number given by DM)
+  - Lift the Fluscreen and aquire Counting Gain Reference Image (you DON'T need to match the number given by DM)
 ==== Direct alignment ====
@@ Line 56: / Line 56: @@
 ==== Objective Astigmatism / Coma-free alignment ====
-This is done in SerialEM. You need to have a sample inserted to do it. Re-use the calibration specimen or a carbon Quantifoil to do it (not a gold grid!)
+This is done in SerialEM. You need to have a sample inserted to do it. Re-use the calibration specimen or a carbon Quantifoil (not a gold grid!). Use the Imaging state you will use for data collection (e.g. mag 45.000kx, spot 6, C2 aperture 30 µm, C2 lens 39.6%)
   - Insert and center Objective Aperture