Differences

This shows you the differences between two versions of the page.

--- tf20_interface [2023/03/22 16:13] – crucifix
+++ tf20_interface [2023/11/01 20:18] (current) – external edit 127.0.0.1
@@ Line 25: / Line 25: @@
     * prepare Dark and gain references.
     * during screening, to acquire images in continuous mode.
 ----
@@ Line 34: / Line 34: @@
 **Role**: It provides camera/microscope commands to allow the user to screen its grids and setup an automated data collection.
-   * The user will use it to:
+  * ++The beginner user will use it to:|<div>
-   * The expert user will use it to:
+  * record the Atlases.
+  * select squares and prepare the square maps at eucentric height.
+  * select targets (position).
+  * screen targets at higher magnification (as single image or montage).
+  * center the different beam modes all together on the camera axis.
+</div>++
+  * ++The expert user will use it to:|<div>
+  * perform all the actions described above.
+  * perform beam corrections (astigmatism, coma-free).
+  * perform calibrations.
+</div>++
 ----
-===== The TEM User Interface (TEM) =====
+===== The TEM User Interface (TUI) =====
-Location: On left screen
+**Location**: On left screen
-Role: It controls all the microscope systems.
+**Role**: It controls all the microscope systems.
-    It is divided into 4 zones:
-    The beginer user will use it to:
+  * ++It is divided into 4 zones:|<div>
-    The expert user will use it to:
-The FluCam User Interface (FC)
+   *Zone1: TUI tabbed pages hosting different commands allowing to control the ME and to know its working state
+   *Zone2: Window showing EM working state like HT value, stage position, magnification, etc …
+   *Zone 3 : Additional TUI Tabbed page
+   *Zone4 : Window defining functions of control panel button:
+{{:capture2_tui_description.jpg?nolink&600|}}
+</div>++
+  * ++The beginner user will use it to:|<div>
+  * load/unload the grids in the column.
+  * change and center the Condenser 2 and objective apertures.
+  * control the turbo pump.
+  * perform beam-shift adjustments.
+  * manually set eucentric height.
+</div>++
+  * ++The expert user will use it to:|<div>
+  * perform all the actions described above.
+  * align the microscope.
+  * troubleshoot the system.
+  * perform cryo-cycle of the column/autoloader.
+</div>++
-Location: On the right screen
-Role: It allows the visualization of the electron beam and the sample image.
+----
+===== The FluCam User Interface (FC) =====
+**Location**: On the right screen
+**Role:** It allows the visualization of the electron beam and the sample image.
+  * ++The beginner user will use it to:|<div>
+  * record the Atlases.
+  * select squares and prepare the square maps at eucentric height.
+  * select targets (position).
+  * screen targets at higher magnification (as single image or montage).
+  * center the different beam modes all together on the camera axis.
+</div>++
+  * ++The expert user will use it to:|<div>
+  * record the Atlases.
+</div>++
-    The beginner user will use it to:
-    The expert user will use it to: